The LED indicates the status of the Go 2 camera.

LED behavior during setup

• Slow blinking blue: The camera is attempting to connect to a WiFi network or is in QR scanning mode.

• Fast blinking blue: The camera is establishing a WiFi or LTE network connection.

• Fast blinking amber: The camera did not connect to the WiFi network or it did not connect to the LTE network. For help with Arlo Go 2 network connections, visit What do I do when Arlo does not discover my device during setup?

• Solid amber: The camera does not detect an activated SIM card in its SIM card slot. For more information, visit How do I install a SIM card in my Arlo Go 2 Camera?

LED behavior after setup

• Solid blue: The LED lights solid blue when the camera is powered on and then turns off to conserve battery power.
  Note: the camera does not record continuously since it needs to conserve battery power.

• Fast blinking blue: The camera’s charging cable is plugged in to a power adapter or the camera is connected to the optional Arlo Solar Panel VMA5600.

• Single blink or double blink amber every 60 seconds: The battery charge is low. A single blink every 60 seconds indicates a low battery charge. A double blink indicates a critical battery charge level.

• Alternating blue and amber: A firmware update is in progress.

• Single blink amber, followed by restart: The camera has been factory reset. For more information, visit How do I factory reset and re-sync my Arlo camera?.