Arlo Go 2 gives you the flexibility of using 2.4 GHz Wi-Fi or LTE for connectivity. You can also use LTE as a backup in case your Wi-Fi internet connection is interrupted.
Note: When using both 2.4 GHz Wi-Fi and LTE mode, Wi-Fi will always be the primary mode of connection.

During setup, you can connect the Arlo Go 2 Camera to either a mobile, Wi-Fi network or both:

• Mobile (LTE): To access the mobile network, your Arlo Go 2 Camera requires an activated SIM card with a mobile data plan. The SIM card must be installed in the Arlo Go 2 Camera.
• Wi-Fi: Your camera connects to an available 2.4 GHz Wi-Fi network.

When setting up Arlo Go 2 for the first time, you will be asked if you want to connect via LTE or Wi-Fi. If you want to use both, you should setup the Wi-Fi connection as it will also include steps on how to install your SIM for the LTE connection.

For more information on how to setup your Arlo Go 2 Camera, visit: How do I set up my Arlo Go 2 Camera?

To change the network mode:

For the Arlo Secure App experience with Feed:

1. Launch the Arlo Secure App.
2. Tap Devices.
3. Tap the Arlo Go 2 device card.
4. Tap
5. Tap Cellular Network or Wi-Fi Network.
6. Tap Set as Default Connection.

For the Arlo Secure App experience with Library:

1. Launch the Arlo Secure App.
2. Tap Devices.
3. Tap the Settings (gear) icon for your Arlo Go 2 camera.
4. Tap Connected to.
5. Select Wi-Fi or Cellular Network.

For more information, visit: What are the benefits of connecting my Go 2 Camera via mobile or Wi-Fi?